• Kearney Townsend posted an update 3 months, 3 weeks ago

    Our panel coolers for electrical cabinets are an easy, reliable and affordable way to cool or climatize any type of enclosures and panels. Supreme Air Electrical Panel Cooler uses compressed air to create hot and cold air streams. Our coolers only require compressed air to operate, which eliminates the need for dangerous refrigerants or freon gases. With large cooling capacities of up to 7200 BTUs, they provide the perfect solution for quick and effective cooling in numerous types of electrical cabinets and enclosures.

    How does a Cabinet Cooler work?

    The cooler mounts vertically on top of the cabinet through a standard knockout hole. A locking ring provided with the cooler locks it into place.

    The compressor air line connects to the cooler via a 1/4 NPT fitting.

    As compressed air enters the cooler, the integrated vortex tube separates the air into hot and cold air streams.

    The hot stream from the vortex tube is exhausted into the atmosphere by passing through a muffler which ensures low noise levels.

    The cold air enters the electrical cabinet though an outlet tube located at the bottom of the cooler.

    As the cold stream enters the electrical cabinet, the hot air within the cabinet starts to rise and is gradually purged through the cooler.

    An optional cold air distribution kit is also available. This connects to the cooler’s outlet tube and allows users to direct the cold stream to hot spots in the cabinet. Supreme Air Products’ electrical panel coolers have been made of stainless steel for durability.

    Cabinet Cooler Specifications

    Mounting:

    Supreme Air Products(tm), Cabinet Cooler must always be mounted vertically on a flat surface. A 1-1/8″ diameter hole or electrical knockout can be used to mount an electrical cabinet cooler unit. The locking ring holds it in place. We offer additional side mount kits for instances where coolers cannot be mounted on the top of the cabinet due to height restrictions.

    Humidity:

    It is important to close off any openings and vents that may bring in ambient air, especially in warm, hot, or highly humid environments. The relative humidity inside the enclosure stabilizes at 45% for all continuously operating Cabinet Coolers

    Filtration:

    Clean filtered air should be used on all lines that power the Cabinet Cooler. We recommend a 5 micron auto drain filter. Proper filtration is imperative to prevent any accidental water flow into the enclosure. Use an oil filter that has a minimum of 0.3 micron rating if oil is found in compressed air.

    Environment Considerations

    NEMA 4/4X IP56 – Designed to be used in Electrical Control Panels. It is splash-resistant, oil-tight and dust-proof, making it suitable for outdoor as well as indoor use. For long-lasting use in wet environments, coolers are made of Type 304 Stainless Steel.

    NEMA 12 (IP52) – Cabinet Coolers (oil-tight, dust-proof) are used in industrial environments where no liquids can come into contact with the unit. To withstand extreme corrosive environments, coolers are made of Type 304 Stainless Steel.

    More details about panel cooler go our website